悬浮法PVC树脂粒径异常问题的解决

分析了聚合过程中影响悬浮法聚氯乙烯树脂粒径的因素,从分散体系、聚合条件、聚合温控3个方面采取了改进措施.     

Solution-Synthesized Multifunctional Janus Nanotree Microswimmer

Synthetic active matters are perfect model systems for non-equilibrium thermodynamics and of great potential for novel biomedical and environmental applications. However, most applications are limited by the complicated and low-yield preparation, while a scalable synthesis for highly functional microswimmers is highly desired. In this paper, an all-solution synthesis method is developed where the gold-loaded titania-silica nanotree can be produced as a multi-functional self-propulsion microswimmer. By applying light, heat, and electric field, the Janus nanotree demonstrated multi-mode self-propulsion, including photochemical self-electrophoresis by UV and visible light radiation, thermophoresis by near-infrared light radiation, and induced-charge electrophoresis under AC electric field. Due to the scalable synthesis, the Janus nanotree is further demonstrated as a high-efficiency, low-cost, active adsorbent for water decontamination, where the toxic mercury ions can be reclaimed with enhanced efficiency.     

基于改进GNG算法的燃煤锅炉数据动态特征分析与控制

数据动态特征分析与控制技术是一种重要的数据挖掘手段,燃煤锅炉数据具有明显时序性和漂移性等特点,针对目前数据跟踪与监督算法大多缺乏动态性、实时性和稳定性等问题,设计一种基于改进生长神经气模型(GNG)的自适应聚类模型,建立基于概率、范围搜寻、节点平均距离的节点生成、删除机制,实现对漂移数据实时监控.最后以燃煤锅炉动态数据为分析对象进行实验,实验结果表明该模型和算法对动态漂移数据的实时跟踪能力更强,能对燃煤锅炉动态数据进行准确、有效的监督和控制.     

Influence of fluorine-containing side chain on the properties of waterborne polyurethane-urea

In order to prepare waterborne polyurethane with excellent water resistance and thermodynamic properties, a series of side chain fluorinated waterborne polyurethane-urea (FWPU-UA) was synthesized with polytetramethylene ether glycol, N-(2-methyl-1,3-propanediol-2′-)-perfluoro-1-butanesulfonyl amine (NPBA), isophorone diisocyanate, and isophoronediamine. With the increase of NPBA content, the weight loss temperature, glass transition temperature, and tensile strength of FWPU-UA were all improved. Gaussian fitting analysis of infrared data and density functional theory simulation proved that the introduction of fluorine side chains increased the interaction of hydrogen bonding in the FWPU-UA. X-ray photoelectron spectroscopy analysis indicated that the aggregation of fluorine atoms on the surface of film were caused by the migration and enrichment of fluorine side chains. Furthermore, the water resistance of polyurethane-urea film could be significantly improved by adding a small amount of NPBA, and the seven-day water absorption rate of polyurethane-urea film was reduced from 30.13% to 12.55%.     

气相合成法制备6N硫化镉多晶

超高纯度的硫化镉(CdS)是Ⅱ-Ⅵ族中具有广泛应用的半导体材料,本文以6N硫、6N镉为原料,讲述了一种气相合成6N硫化镉多晶材料的工艺方法,分析了不同合成装置对合成效果的影响,探讨了气相合成硫化镉的工艺过程,包括硫蒸发室、镉蒸发室温度曲线的控制,硫蒸发室和镉蒸发室运载气体流量控制,以达到硫化镉最佳合成工艺条件.     

基于C#持久蠕变强度外推功能的实现

持久蠕变强度外推是预测材料在高温高压环境下工作寿命的有效方法。目前常用的外推方法有等温法和参数法。这两种方法都是通过在实验室中采用较短时间的试验，获取试验数据后，通过Excel或者MATLAB等数据处理软件进行数据的拟合处理和外推计算。这些数据归纳统计和数学建模的过程有时需要耗费试验人员的大量精力。介绍了持久蠕变强度外推的软件实现方法，该功能包含在持久蠕变试验设备配备的软件中，试验完成后，软件直接根据试验结果进行数据拟合和持久蠕变强度的外推计算，无需试验数据的统计和建模，大大提高了持久蠕变强度外推计算的效率。     

Precise quantification of the antibacterial activity of chitosan by NB medium neutralizer

In the present research,nutrient broth(NB)medium was identified to be able to neutralize the antibac-terial activity of chitosan and its derivatives.Therefore,an improved test method independent of NB medium was proposed to precisely quantify the antibacterial effectiveness and efficiency of chitosan.The minimum bactericidal concentration(MBC)of chitosan was 60 μg mL-1 against S.aureus and E.coli,and 0.01％(w/v)chitosan could kill 100％of bacteria within 3 min.From another point of view,the neutralizing efficiency of NB could be tripled by adding 25 g L-1 of sodium chloride.Then the neutraliz-ing mechanism of NB medium was ascribed to flocculation between chitosan and protein.Adding extra sodium chloride could significantly reduce the size of floccules,and smaller floccules would lose the ability of binding with bacteria directly,showing higher neutralizing rate on the macro scale.     

Design and optimization of ceramic membrane structure: From the perspective of flux matching between support and membrane

The support flux was first investigated as a separate influencing factor for its effect on performances of ceramic filtration membranes. Three pre-membranes were prepared by tape-casting and then transfer-coated to supports to form dual-layer ceramic membranes after sintering. Experiments demonstrated that membrane layers with almost the same properties were obtained despite the huge difference in support flux. When the support flux increases from 3.120 to 97.53 m³m^?2h^?1, the flux of these three membrane series have increased by 75%, 186% and 228%, respectively. Experimental rules can provide structural design and evaluation from the perspective of permeability. The limit membrane flux of a certain system was derived according to the resistance distribution law of internal membrane structure and the Darcy's theorem. On this basis, a method for designing support flux was proposed. Furthermore, we present a criterion to quickly and easily evaluate the match between the support and the top layer, which is the ratio of membrane resistance to total resistance. Finally, the filtration resistance of penetration caused by suction of membrane particles into the support was measured for the first time, taking the advantage of the transfer-coating method that inherently free of penetration. Our works are expected to deepen the understanding of the ceramic membrane structure and provided guidance for its rational design and optimization.     

多晶硅表面金属催化化学腐蚀法制绒研究现状

在多晶硅太阳能电池的生产过程中, 金刚线切割技术(Diamond wire sawn, DWS)具有切割速度快、精度高、原材料损耗少等优点, 受到了广泛关注。金刚线切割多晶硅表面形成的损伤层较浅, 与传统的酸腐蚀制绒技术无法匹配, 金属催化化学腐蚀法应运而生。金属催化化学腐蚀法制绒具有操作简单、结构可控且易形成高深宽比的绒面等优点, 具有广阔的应用前景。本文总结了不同类型的金属催化剂在制绒过程中的腐蚀机理及其形成的绒面结构, 深入分析和讨论了具有代表性的银、铜的单一及复合催化腐蚀过程及绒面结构和电池片性能。最后对金刚线切割多晶硅片表面的金属催化化学腐蚀法存在的问题进行了分析, 并展望了未来的研究方向。